MAXTEL Front Wiper Blade Set, Compatible with Chrysler Prowler 2000-2002, Driver Side 19" (480mm), Passenger Side 17" (430mm)

Key Features

• READY TO INSTALL: This product comes with a pre-mounted Quick-Clip adaptor for U-hook (J-hook) wiper arms and is ready to install. Each blade clips onto the arm in seconds.
• AERODYNAMIC DESIGN: The aerodynamic design and sturdy metal frame keep full, even pressure on the glass for a steady wipe, even at high speeds.
• CLEAR VISIBILITY: Built for rain, snow, dust, and fog; clear visibility for a safe drive helps keep every journey focused in all weather conditions.
• NATURAL RUBBER: The PTFE-coated 100% natural rubber wiping edge resists heat, cold, abrasion, aging, and ozone for a smooth, quiet, streak-free wipe.
• MADE TO FIT: Compatible with Chrysler Prowler 2000-2002; two front blades in one box, a Driver Side 17 in (430 mm) and a Passenger Side 19 in (480 mm), both in black.

Description

A clean, even sweep across the glass makes every trip easier, rain or shine. A small change that makes a big difference behind the wheel.

As air flows over the windshield, the aerodynamic shape of the blade helps hold it down on the glass instead of letting it lift away.

Installation is simple: turn the engine off and move the wiper arms to the service position (see your vehicle's owner's manual). Lift the wiper arm and remove the old blade. Fit the new blade onto the end of the arm so the U-hook sits over the Quick-Clip adaptor, slide it into place, then slide the locking cover closed. Gently lower the arm back onto the windshield. For best results, wash the windshield with soap and water before first use.

In winter, clear heavy snow from the windshield first. If a blade is frozen to the glass, gently free it before switching the wipers on so the rubber is not torn.

In summer, use washer fluid rather than wiping a dry, dusty windshield, so dust does not scratch the glass or wear the rubber.

Our product photography is our own, shot in-house with the actual item we ship.